Novell NetWare

Revision as of 20:53, November 8, 2005 by 137.165.214.222 (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Know why it's on your computer

Assuming you have a PC, having Novell on your computer allows you to connect to the Williams Network, which allows you to do lots of cool stuff, including all the other how-to's that have the word "network" in them. For example, you can share your music on iTunes, store and access files in your network folders, print to network printers, run programs that would normally cost hundreds of dollars using the keyserver, and connect to other computers on the network to access their shared documents.

Know the difference between your Windows password and your Novell password

When you start your computer, if Novell is installed, a window will pop up that asks you for your user name and password. There is also a little check box that says Workstation Only. If the Workstation Only box is checked, you will not log onto the network, and you will only be asked for your personal computer's password. This is the username and password you had on your computer before Novell was ever around. If you didn't have a password before, you don't have one now.

If Workstation Only is NOT checked, then you ARE logging on to the network. This username and password is your unix username and password, which is what you would use to check your email or log in to Blackboard.

Know when to log on to the network

If you are not at Williams, not connected to a jack by an ethernet cable, or you don't want to use any of the cool network stuff, check Workstation Only and don't log in to the network.

If you are using a wireless card, check Workstation Only when you start your computer. To begin using wireless internet access, simply open up any internet browser, say Yes to the popup message about the security Certificate, and log in to the grey Cisco page with your unix (email/blackboard) name and password. Once you do this you can log into Novell if you want to be on the network. Do this by right clicking on the red N in your Quick Launch toolbar in the lower right corner of your screen and selecting "NetWare Login...".